Bargain group

APSS :- system will reduce kwh, kWh, kVA and kVAr, as well as harmonic amplification, circulating currents, line voltage unbalance and insulating losses.

APSS :- system is guaranteed for 2 years and designed for a life expectancy..

APSS :- system was designed for both linear & non-linear equipment and where the use of standard capacitors is questionable..

APSS :- system will improve the efficiency and operation of AC Motors, DC Drive Systems, Pulse Width Modulation Systems, Variable Frequency Drive Systems, Silicon Controlled Rectifiers, Networks and virtually every electrical device in your facility

WHO NEEDS THE APSS SYSTEM?

You do. If you are operating with todays' sophisticated automation using AC Motors, Voltage / Frequency Drives, DC Drives, and Silicon Controlled Rectifiers, Processing Controllers and Robotics or any non-linear Industrial or commercial application. Any facility from the oldest to newest, which utilizes linear and / or non-linear applications. Is a potential beneficiary of APSS system.

HOW DOES THE APSS SYSTEM WORK?

We are all aware that energy saving through power factor Improvement mainly depends on Installing capacitors that adds current on load Increase and hence decreasing current from source. There are three possibilities for current added through capacitors:

1. Capacitors that are not equipped with any Internal resistance; In this case It adds to the reactive current without any Increase In active current, as shown In figure (a). (This kind of device Is not available In the market)

2. Capacitors that are equipped with internal resistance and mainly function to decrease reactive current from source which Increase consumption, as shown In figure (b). According to IEC power factor correction panel should never be more 2 W/kVAr.

3. Capacitors that are equipped with a negative resistance (Introduced APSS system). It functions to decrease both active and reactive currents and hence decreasing consumption and power factor, as shown in figure (c).

General Definitions for Basant Tech. Product ( APSS )

APSS Panel achieves the following:

Saves over the supply AC current that appears in the existing type of energy

in the network as follows:

First: The Active Power P=VI cos ?

The active power is measured by KW and is measured in the consumption

by KW.hr.

The active power is what the load needs to operate either if it is a motor – lighting- equipment- etc…

Second: The Reactive Power Q= VI sin ?

The reactive power is measured by KVAR and exists in the electric networks due to load characteristics.

The reactive power represents part of the consumed apparent power in the

network as:

S: Apparent Power

P: Active Power

Q: Reactive Power

I.e.: the apparent power S (KVA) is the resultant of the active power P (KW) and the reactive power (KVAR). The following example will explain the concept of operation of the APSS

An electric engine consumes certain active power P and a certain reactive power Q from the source. The apparent power S (KVA) is the resultant of the two vectors.

As P = S cos ?

As much as the power factor is closer to be unity as much as the benefit is greater for the consumer and the electricity Distribution Authority and as much as we can reduce the reactive power as much as the apparent power gets closer to the active power and this is one of the panels' advantage.

S	Code	A	VA	K	MCCB	F	C	Color/Size
1	5/9	10	38	D12			6MM	Blue
2	7/10	24	91	D32			16MM	Beige
3	9/15	35	133	D40			16MM	Orange
4	25/12	40	161	D50			16MM	Beige
5	20/60	55	209	D65			25MM	Gray
6	30/90	90	342	D65			50MM	Gray
7	100	100	380	D32	100	63	70MM	50x70x25 CM
8	150	150	570	D40	225	63	95MM	60x80x25 CM
9	200	200	760	D65	225	80	95MM	50x125x40 CM
10	250	250	950	D65	250	80	120MM	60x125.x40 CM
11	300	300	1140	D65	400	100	150MM	60x180x40 CM
12	350	350	1330	D65	400	100	150MM	60x180x40 CM
13	400	400	1520	D65	400	100	185MM	80x180x50 CM
14	450	450	1710	D65	400	160	185MM	80x180x50 CM
15	500	500	1900	D65	630	160	240MM	100x200x50 CM